IP address), you must get a Host Transfer Affidavitfrom the Licensing Center and submit the form to Sun. If you do not receive new authorization codes after you move the Backup software, the software disables itself in 15 days.

Caution - You must remove the server software from the machine you transferred from or shutdown the nsrddaemon. If you start the nsrddaemon on another machine with the same base enabler, you will receive a copy violation error message and the software is disabled.

IMAGE imgs/admin.book06.gif

Roadmap of Backup Configuration Tasks

This section provides a suggested roadmap for you to follow to set up and configure
Backup for your environment. Cross-references to instructions found elsewhere in
this Administrator's Guideare included.
1.Install and enable Backup according to the instructions in the Solstice Backup 5.1
Installation and Release Notes.
2.
Configure the Backup server.
See "Basic Configuration for the Backup Server" on page 11 for more information. 3.Configure one or more devices:
-For standalone devices, see "Device Configuration" on page 57.
-For devices in an autochanger, see "Autochanger Device Configuration" on
page 58. See "Autochanger Module" on page 129 for a complete discussion
about how to manage an autochanger for use with Backup.
-For devices in a silo, see "Silo Installation and Configuration" on page 172.
-For file devices, see "Device Configuration" on page 57 and "Save Set Staging"
on page 79.
4.Configure the client resource for the server and any additional clients that connect
to the server.
See "Clients Resource" on page 17.
5.Register your Backup software and enter the authorization code returned to you
within 45 days of enabling.
See "How to Register and Authorize Your Software" on page 14 for more
information.

8

Solstice Backup 5.1 Administration Guide

*April 1998